Laser tube cutting chuck is specially matched for laser tube cutting equipment

The laser tube cutting chuck is specially used for laser tube cutting equipment. The product itself can be used as an independent rotating spindle, and there is a chuck that can firmly fasten the workpiece and rotate in the middle. The chuck has a built-in independent cylinder, which has a long-term pressure holding function (above 8h). The side-rotating air intake can be used to achieve rapid clamping and unclamping actions, and the air source can be disconnected before it can work. After the product base is fixed, only the matching motor and gear connection are needed, and the compressed air source (0.4-0.9Mpa) can be connected to clamp the workpiece and drive the workpiece to rotate. Mainly used for clamping the workpiece, rotating, and feeding back and forth.

Due to the long length of the parts processed by the laser pipe cutting equipment, it is generally used as a tail card and its combined main card to be installed on the equipment in pairs.

The product is a four-jaw dual-power automatic centering structure in pairs, which can be used to clamp circular, square, rectangular, oval and other axially symmetrical parts.

Application range of laser tube cutting chuck:

The laser tube cutting chuck is suitable for laser cutting tube equipment, rotary cutting round tube, square tube, oval tube, etc.

Precautions for laser tube cutting chuck:

1. Under the condition of complying with the product transportation, storage, equipment, adjustment, maintenance and operation rules, if the product is found to be unable to work normally due to manufacturing quality problems or the packaging is found to be damaged due to poor quality when unpacking, the accessories do not match the packaging list, and the parts Insufficiency, etc., within 1 month from the date of receipt, please contact the quality department of our company. When sending the information, please indicate the product model, specification, serial number and delivery date.

2. The product should be installed and used in an environment of 0～40℃.

3. When using product equipment, users are required to strictly abide by the specifications. If you have any questions or improvements, please notify the Quality Department.